horsch Leeb 5.280 VL, Operating Instructions Manual

Page: 204 / 308

Outside cleaning
(optional)
NOTE
Wash the machine for the first time after
3 months at the earliest with a steam jet or
high pressure cleaner to avoid damage to the
paintwork.
Keep a distance of at least 150 cm from elec-
tronic components, terminals, electronic ports
to the cabin or sensors with a water jet.
After cleaning, check the hydraulic lines for
leaks and firm connections. Retighten screw
connections if necessary. Relubricate all lubri-
cation points.
With outside cleaning, undesired contamination
is removed and the unintentional dripping of
adhering crop protection agents is prevented.
NOTE
Outside cleaning is supplied with fresh water
via the centrifugal pump. (With standard water
system depending on the valve position)
WARNING
Danger through accidental contact with spray-
ing mixture!
Wear personal
protective outfit!
Before using the outside cleaning system the
cleaning programs of the crop protection sprayer
must be cycled through since the residual
chemical still contained in the water system is
pumped off via outside cleaning before fresh
water arrives at the cleaning gun.
CAUTION
Risk of fluids escaping under pressure.
The external cleaning system may be contami-
nated with spraying mixture deposits!
Secure the washing gun with the lock against
accidental spraying:
¾
before each spraying pause
¾
before the washing gun is stored again in its
holder after cleaning is finished.
200 201