horsch Leeb 5.280 VL, Operating Instructions Manual

Page: 192 / 308

Multiple nozzle body manual triple
The triple nozzle body is used if more than one
nozzle type is used. Only the vertically arranged
nozzle will be supplied.
By turning the nozzle body, another nozzle is
brought into use.
In intermediate positions the nozzle body is
switched off.
NOTE
Flush the spraying lines and the active nozzle
before turning the triple nozzle body to another
nozzle type!
Fluid always escapes on all vertical nozzles. If
a pressure of more than 4 bar is applied to the
compressed air connection (4), the valve will
open and fluid can flow out. Without pressure
the valve is closed.
1
2
3
4
5
6
7
8
1 Nozzle body
2 Diaphragm
3 Pneumatic control valve
4 Compressed air connection
5 Bayonet connection
6 Rubber seal
7 Bayonet cap
8 Nozzle
Nozzle body
Single nozzle body with pneumatic con -
trol valve
If a pressure of more than 4 bar is applied to the
compressed air connection (4), the valve will
open and fluid can flow out. Without pressure
the valve is closed.
1
5
6
7
8
2
3
4
9
1 Nozzle body
2 Seal attachment
3 Diaphragm
4 Pneumatic control valve
5 Bayonet connection
6 Rubber seal
7 Bayonet cap
8 Nozzle
9 Compressed air connection
New control valve must be installed with all
nozzle bodies.
188 189