horsch Leeb 5.280 VL, Operating Instructions Manual

Page: 69 / 308

Figure: FPT©
¾
Introduce the new filter.
Figure: FPT©
¾
Reattach the plunger of the filter.
Figure: FPT©
¾
Screw the lid of the carbonyl diamide fil-
ter back on. Tightening torque: 20 ± 5 Nm
[14 ft lb ± 3.5]
Figure: FPT©
Diesel filter change
NOTE
The diesel filter must be replaced every 600 op -
erating hours or annually.
Vent the system after changing the filter!
Ventilation
¾
Fill the fuel tank with fuel.
¾
Open the vent screw.
¾
Pump with a hand pump until fuel escapes
from the vent screw without forming bubbles.
¾
Close the vent screw max. 8 Nm.
¾
Continue operating the hand pump until a
noticeable resistance is felt.
¾
Now start the engine.
NOTE
Never hold the ignition key longer than 10 sec-
onds in the starting position. Wait 30 seconds
before attempting the next start.
64 65