horsch Leeb 5.280 VL, Operating Instructions Manual

Page: 123 / 308

Display outside temperature
Press the shift key (4) to display the cabin or
outside temperature.
The function light (4) lights. The display (1)
shows the outside temperature.
4
1
Change temperature unit
Press and hold the shift key (4) to display the
cabin or outside temperature and the minus key
(5) to reduce the cabin temperature or fan speed
simultaneously for 3 seconds.
The temperature display is switched to the
°Fahrenheit unit.
Repeat to reset the unit to °Celsius .
4
5
Adjusting the air flow of the air
conditioner
The air flow in the cabin is distributed by the fan
nozzles (a), (b) and (c) above, to the right and
left of the windscreen.
Each fan nozzle can be manually opened, closed
and adjusted in any direction.
To heat the footwell, adjust the fan nozzles as
follows:
¾
Close adjustable fan nozzles (a).
¾
Close upper fan nozzles (b).
¾
Open lower fan nozzles (c) completely.
¾
Align the blades of the fan nozzles (c) with
the footwell.
Activate ECON mode
In ECON mode, the air conditioning compres-
sor is switched off. The cooling of the cabin is
switched off. Heating and, depending on the
setting, ventilation are automatically controlled.
This operating mode should be used when the
cooling function is not required.
9
2
Activate ECON operation:
¾
Switch on ECON mode (9). The function light
(9) lights.
¾
The function light for automatic mode (2) goes
off. The ECON mode is active and the cooling
function is off.
Drying cabin windows with
REHEAT mode
To dry the cabin windows, the compressor
is permanently switched on at maximum fan
speed. The heating is controlled to the adjusted
set point.
3
Dry the cabin windows:
¾
Close the cabin doors.
¾
Switch on REHEAT mode (3). The function
light (3) lights. REHEAT drying mode is active.
¾
The fan is set to maximum power.
¾
If necessary, change the fan speed; see Adjust-
ing the fan speed manually .
118 119