horsch Leeb 5.280 VL, Operating Instructions Manual

Page: 172 / 308

NOTE
¾
Do not overfill the reservoir; the oil level
should lie between MIN and MAX.
¾
Switch off the pump to check or top up the
oil level.
¾
Contact HORSCH Service if the oil must be
topped up daily or if the oil is discoloured!
Technical data:
Type
AR 185
Flow rate at 480 rpm 160 l/min
[42 gal]
Illuviation valve
The pivotable illuviation valve is used to pour in,
dilute and draw in crop protection agents and
carbonyl diamide.
The illuviation valve can be swivelled to the
working and transport position with the handle.
1
2
3
4
5
Illuviation valve with stainless steel funnel and folding
rest
1 Hinged lid
2 Handle to swing the illuviation valve
3 Parallelogram arm for swivelling the illuviation valve to
the working and transport position
4 Switching fitting for canister flushing / closed circuit
flushing line / shock nozzle and washing gun
5 Switch-over ball valve for sucking-off and connecting
external filling devices
6
7
8
9
10
11
6 Connection external filling devices
7 Washing gun
8
Activate/deactivate the canister flushing
9 Activate/deactivate washing gun
10 Activate/deactivate the shock nozzles
¾
The shock nozzles support the illuviation of difficult
to dissolve crop protection agents.
¾
Two rinsing nozzles and the shock nozzles in the
lower area of the Illuviation valve are activated.
11 Activate/deactivate the washing nozzles
12
13
14
14
14
14
15
15
16
17
12 Filling level gauge
13 Suction opening
14 Rinsing nozzles for dilution and illuviation of crop pro-
tection agents
15 Shock nozzles for dilution and illuviation of crop protec-
tion agents
16 Pressure plate
17
Rotating canister flushing nozzle to flush out canisters
or other containers
168 169