horsch Leeb 5.280 VL, Operating Instructions Manual

Page: 93 / 308

Overview of components
The air filter consists of the following compo -
nents:
a
b
c
d
f
e
g
(a) Housing lid with fastening clips
(b)
Main element / primary filter
(c) Safety element
(d) Housing
(e)
Preliminary filter system
(f) Vacuator valve
(g) Screw clamp
Disassembling / cleaning the air filter
Shut down the vehicle engine before starting
work on the air filter. With all work make sure
not to damage any seals and not to bring dirt
into the housing.
1
2
3
4
1. Open the clips on the housing cover (a) and
remove the lid.
2. Push the main element (b) at a slight angle
of 5° towards the front.
3. Remove the main element (b).
4. Remove the safety element (c).
NOTE
Never wash out or brush off the main element
(b). When blowing it out no dust should enter
the inside of the main element. Do not continue
to use a damaged element. If in doubt, use a
new main element.
If the contamination indicator is still visible in the
display after cleaning, replace the main element!
Replace the main element after 1200 h or annu -
ally. Refer also to the Maintenance chapter.
Installing the air filter
5
6
7
8
NOTE
Check the main element (c) for damage, cracks
and cuts before installation.
88 89