horsch Leeb 5.280 VL, Operating Instructions Manual

Page: 80 / 308

¾
Remove the end plates on the guide columns
of the wheel suspensions.
¾
Push in the lifting device from below and hook
in to the rear of the suspension sled.
¾
Place the jack under the lifting device. The
device is fixed and the wheel can be lifted.
Axle lifting device
(optional)
A lifting device is available for mechanical track
and height adjustment allow to lift the machine
by individual axles.
Axle lifting device
Track width
Leeb 5.280 / 6.280 / 8.280 / 5.300 / 6.300 /
8.300 VL:
•
Depending on the equipment and variant of
the vehicle, the track width can be set be-
tween 2.60 to 4.47 m [102 to 176 in].
Leeb 5.280 / 6.280 / 5.300 / 6.300 VN:
•
Depending on the equipment and variant of
the vehicle, the track width can beset between
2.25 to 3.20 m [89 to 126 in].
2 equipment variants, mechanical or hydraulic,
are available to adjust the track width.
NOTE
Adjust the height before setting the track width.
The track differs between top or bottom when
performing the height adjustment.
Mechanical track width
adjustment
The track width is set via sliding axles.
1
2
3
1 Hexagon nut
2 Grub screw
3 No adjustment required
76 77