A-56
The vertical line on the graph shows the current throttle channel
position. When the throttle channel is deflected fully in one
direction, the line is to the extreme left over Point-L, when it
is at neutral it is in the center over Point-1 and when it is fully
deflected in the other direction the cursor is at the extreme right
of the graph over Point-H. Where the vertical line intersects the
Curve/Line over a given point defines the pitch servo’s position,
which is equal to the value assigned to that point.
The graph illustrates the pitch curve. The X-Axis (horizontal
plane) represents throttle channel movement. The Y-Axis
(vertical plane) represents the Pitch servo movement.
The Exponential function blends the Curve between the points
on the graph to provide a smooth response. The default value is
OFF. To turn it on and smooth the mixing curve, highlight and
select OFF and it will toggle to ON.
The Pitch servo position next to OUT at the bottom left of the
display is expressed in values from 0 to +100. It represents the
servo travel that corresponds to the present Throttle Channel
position.
Vertical Line
Graph
Points That Can Be Added and Adjusted
The Pitch Curve is defaulted to three points (L, 1 and H). Up to
five additional points can be added. To add a point, move the
throttle stick in the desired position until STOR appears on the
left bottom of the screen. Pressing STOR will store a new point
at that position.
Exponential
Pitch Channel Position
Throttle Channel Position
The Throttle channel position is shown on the bottom line of the
display next to IN and is expressed in values from 0 to 100 with
50 being the center or neutral position. It represents the present
Throttle channel position.
Note
: To eliminate a point press ERAS (bottom left of the
screen) when the point is highlighted.
Summary of Contents for JR DSM 12X
Page 191: ...W 5 ...
