Horizon Hobby JR DSM 12X Instruction And Programming Manual Download Page 190

Page: 190 / 192

W-4

Inspection or Repairs

If this Product needs to be inspected or repaired, please call for

a Return Merchandise Authorization (RMA). Pack the Product

securely using a shipping carton. Please note that original

boxes may be included, but are not designed to withstand the

rigors of shipping without additional protection. Ship via a

carrier that provides tracking and insurance for lost or damaged

parcels, as

Horizon is not responsible for merchandise

until it arrives and is accepted at our facility

. A Service

Repair Request is available at www.horizonhobby.com on the

“Support” tab. If you do not have internet access, please include

a letter with your complete name, street address, email address

and phone number where you can be reached during business

days, your RMA number, a list of the included items, method of

payment for any non-warranty expenses and a brief summary of

the problem. Your original sales receipt must also be included

for warranty consideration. Be sure your name, address, and

RMA number are clearly written on the outside of the shipping

carton.

Warranty Inspection and Repairs

To receive warranty service, you must include your

original sales receipt

verifying the proof-of-purchase date.

Provided warranty conditions have been met, your Product will

be repaired or replaced free of charge. Repair or replacement

decisions are at the sole discretion of Horizon Hobby.

Non-Warranty Repairs

Should your repair not be covered by warranty the

repair will be completed and payment will be required

without notification or estimate of the expense unless

the expense exceeds 50% of the retail purchase cost.

By submitting the item for repair you are agreeing to payment

of the repair without notification. Repair estimates are available

upon request. You must include this request with your repair.

Non-warranty repair estimates will be billed a minimum of ½

hour of labor. In addition you will be billed for return freight.

Please advise us of your preferred method of payment. Horizon

accepts money orders and cashiers checks, as well as Visa,

MasterCard, American Express, and Discover cards. If you

choose to pay by credit card, please include your credit card

number and expiration date. Any repair left unpaid or unclaimed

after 90 days will be considered abandoned and will be

disposed of accordingly.

Please note: non-warranty repair

is only available on electronics and model engines.

Electronics and engines requiring inspection or repair should

be shipped to the following address:

Horizon Service Center

4105 Fieldstone Road

Champaign, Illinois 61822

Horizon Hobby UK

Units 1-4, Ployters Road

Staple Tye - Southern Way

Harlow

Essex

CM187NS

United Kingdom

All other Products requiring warranty inspection or repair

should be shipped to the following address:

Horizon Product Support

4105 Fieldstone Road

Champaign, Illinois 61822

Please call 877-504-0233 or visit horizonhobby.com

to find our distributor for your country for support with

any questions or concerns regarding this product or

warranty.

Summary of Contents for JR DSM 12X

































































































































































































Search results

Summary of Contents for JR DSM 12X

Reviews:

Related manuals for JR DSM 12X

Brands by name

Popular brands

Horizon Hobby JR DSM 12X, Instruction And Programming Manual

Search results

Summary of Contents for JR DSM 12X

Reviews:

Related manuals for JR DSM 12X

Brands by name

Popular brands