H-30
5. The AUTO function automatically selects Dual Rate and
Expo setting in each flight mode. If the AUTO function is
desired highlight the desired switch under AUTO and select
SW for dual rate switch or the desired D/R position to
automatically activate that selection when the corresponding
flight mode is selected. The active flight modes will be
displayed. Select SW (D/R switch), or Pos1 through 5, and
that position will be active when the corresponding flight
mode is selected.
Use Sub Trims to fine-tune the output alignment of the servo
arms.
1. Highlight and select Sub Trim in the FUNC.LIST to obtain
the Sub Trim Display.
2. Highlight and select the channels where the sub trims must
be adjusted. Once a channel is selected, rotate the Selector
until the servo arm is in the desired position.
AUTO Function
15: Sub Trim
To Program Sub Trim Values
Summary of Contents for JR DSM 12X
Page 191: ...W 5 ...
