A-1
The ACRO mode is intended for powered fixed-wing aircraft.
It contains a host of advanced features that are designed to
assist the pilot in realizing the full potential of the aircraft. These
features include:
• Up to 5 flight modes
• Switch and lever assignability
• Triple Rates and Exponentials for Aileron, Elevator and
Rudder that can be combined or assigned to flight modes
• 4 programmable Wing Types (Normal, Flaperon, Delta,
4-aileron)
• Aileron Differential with two values
• V-Tail mixing
• Dual Channels for All Primary Flight Controls and Flaps
• Dual Throttles (With Independent Trims and Throttle
Curves)
• Adjustable Trim Rates (10–100 Trim Steps)
• L.S.T. trim—trim can be programmed to affect end points
or center point only
• Elevator-To-Flap mixing
Airplane – Acro Mode
• Aileron-To-Flap mixing
• Governor mixing
• Balance mixing allows precise mixing of slave channel to
master at multiple points
• Throttle hold—can be assigned as a kill switch
• Aileron-To-Rudder mixing
• Throttle Curves (2)
• Flap System (With Elevator Trim, Auto Land, Elevator/Flap
Delay)
• Gyro System (In-Flight Gain Selection of 3 Gains for up to
2 Gyros)
• Servo Speed (Independent in Both Directions – Eliminates
Door Sequencers)
• 8 Programmable Mixers (Includes 5 Multi-Point Mixers)
• Programmable Trainer System (Selectable Channels for
Student Control)
• Timers- up to three (Stopwatch, Countdown, Integrated)
• Servo Monitor (Automatically Renames Channels According
to Assignments)
• Pitch Curve Mixing for variable pitch props
Summary of Contents for JR DSM 12X
Page 191: ...W 5 ...
