A-23
The throttle hold function is normally used as a kill switch
for glow-powered airplanes or as a safety/ arming switch
for electric-powered aircraft. It can also be used to preset
a programmed throttle position. For example with electric
sailplanes it can be used to give full power when the switch
is activated. The throttle hold function switch position and
direction is assigned in Device Select. The actual programming
of the throttle hold position is done in Code 16 Throttle Hold
screen in the Function mode (see page A-33).
1. In Device Select, highlight and select Throttle Hold using
the Roller.
2. Using the Selector, highlight and select MIX SW next
to THRO Hold. When selected, 12 switch options and
directions appear: Highlight and select the desired throttle
hold switch and direction.
Throttle Hold
To Assign Throttle Hold to a Switch
Note
: Throttle hold is defaulted to the mix switch.
Summary of Contents for JR DSM 12X
Page 191: ...W 5 ...
