Horizon Fitness BQ-270, Manual, Page: 25 / 122

19
2-2 Bind the Books Using the Binding Screens
- Main Binding Screen
The current job information and the production conditions are displayed here.
Binding Counter/Pre-set Counter. Press to clear the counter. To change to the pre-set counter,
press the counter box and input the new pre-set number using the Numeric Keypad Screen. Press the
right part of the pre-set counter ( ) and input 0 to return to the binding counter. See figure above.
This adjusts the production speed (carriage clamp moving speed) in five steps.
: Slow down : Speed up
This indicates the book block thickness already entered on the Setting Screen.
This indicates the distance between the cover sheet edge and the spine already entered on the Setting
Screen.
When using a saved job, the job number appears here. When not using a saved job or the read memory
has been changed, 0 is indicated here.
This area displays the production conditions.
Press this button to lower the feed table.
Press this button to feed one cover sheet. The machine memorizes the cover sheet thickness in order to
detect the double feeding.
This button is used to stop the motor on each unit after the binding operation. (Before the motor drives,
start icon is indicated.) Press this button before switching the power off.
Status Monitor
: This symbol will appear when the cover sheet is fed to the nipping section, and the book block is
put in the carriage clamp.
:This symbol will appear if a cover sheet is not fed automatically to the nipping section. Feed a cover
sheet by pressing both start buttons.
Booklet is not delivered within 2 seconds after the carriage clamp has opened.
Double feeding Misfeeding In operation Delivery section full
No cover sheet on the feed table. Set the cover sheets. Insert Book Block
Pre-set number of binding is finished.
Milling ON/OFF lever Error Press start button to drive the motor.
Remove cover sheet on nipper. Remove cover sheet at double feed detect sensor.
1
0
30
Binding Counter Pre-set Counter
00000 0030 0000
C
1
2
3
4
8 9 7
6
10
5
1 C
2
3
4
5
6
7
8
9
10
OK
###