Horizon Fitness BQ-270, Manual, Page: 19 / 122

13
2-1
Entering the Job Information Using the Setting Screens
- - Cover Sheet Size Screen
Input the cover sheet length in increments of 0.1 mm (0.005”). The input range is
230.0 to 660.0 mm (9.055” to 25.985”).
Input this setting first on this screen.
Input the length between the cover sheet rear edge and the spine (using either
edge, or the center of the spine). The input range is shown in illustration below.
or : Either edge of the spine
: Center of the spine.
Input the cover sheet width in increments of 0.1 mm (0.005”). The input range is
135.0 to 320.0 mm (5.315” to 12.600”).
When measuring the distance to the center of the spine, use the accessory
alignment plate.
4
1
2
3
1
2
135 to 320
(5.32" to 12.60")
230 to 660
(9.05" to 25.98")
120 to 350
(4.72" to 13.77")
110 to 310
(4.33" to 12.20)
Movable Side
Scoring
(Front Side)
Downstream
Fixed Side
Scoring
(Rear Side)
If the dimension is out of this range, the front
or rear guides may not reachthe cover sheet edge.
mm(inch)
3
0
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
10
20
think automation. think automation.
think automation.
Center of the Spine
Alignment Plate