Horizon Fitness BQ-270, Manual, Page: 108 / 122

102
8-1 Installation
Place a foot under the fourth level-
ing bolt shown in the illustration
below.
- Lower the leveling bolt until it hits the foot.
- Turn the leveling bolt 90 degrees more after it
hits the foot.
Lock each leveling bolt using the
lock nut.
Attach the spacer and the adapter.
- Attach the spacer and the adapter on the right
side of the machine and fix with the screw.
Attach the trimmings bag.
- Attach the trimmings bag on the adapter and
tie it with the string.
Install the touch panel.
- Remove the top plate and install the panel
with four screws as shown below.
Wire the touch panel.
- Install the ground from the touch panel to the
position as shown below.
- Connect the cables shown below to the CON3
and CON4 on the touch panel P.C.Board.
Top View
Lock Nut
Leveling Bolt
Foot
Mouth
Spacer
CON3
CON4
Ground