Connection
12
Perform terminal processing for the signal lines as illustrated below.
Note
Do not apply any load exceeding the maximum rating to each terminal. It could cause
malfunction.
Do not connect the power cable to the signal wiring section. It could cause malfunction of the
equipment.
For analog input/output and
contact input/output
For RS communication
0.75 mm
2
to 2.5 mm
2
(AWG18 to 14)
7 mm
Signal line terminal processing
5.2 mm (max.)
4 mm (max.)
7 mm (max.)
Applicable terminal
0.14 mm
2
to 2.5 mm
2
(AWG26 to 14)
7 mm
Signal line terminal processing
