Function
139
HOUR REPORT
Displays the graph of the past hourly report data obtained every hour on the hour. The display
settings of the graph can be specified.
Operation procedure
1.
Press [GRAPH] in the DATA 1/2 screen.
2.
Press [HOUR REPORT HISTORY] in the GRAPH screen.
The HOUR REPORT (graphical display) screen will be displayed.
Tip
Pressing [
←
]/[
→
] in the graphical display screen moves to the previous/next plot, allowing you to
check the data.
3.
To change the graphical display setting, press [SET] in the HOUR REPORT screen.
The GRAPH SET screen will be displayed.
4.
Specify the graphical display conditions on the GRAPH SET screen.
Item
Setting range
Setting
Measure Line L1
L2
-
Specifies the line to be displayed in a graphical
form.
Component
Flow
Water
Payload
-
Specifies the components.
Scale
Water: 0.01 to 1000
Flow: 1 to 999999
Payload: 0.00 to 9999999
Specifies the graph display scale
(concentration range).
Start Time
2009/01/01 00 to 2099/12/31 23
Specifies the display start date.
Period
1 day
7 days
30 days
Specifies the display range (period).
Vertical Top
25%
50%
75%
100%
Specifies the upper limit on the vertical axis of
the graph for the full scale of the measurement
range.
Vertical Under 0%
25%
50%
75%
Specifies the lower limit on the vertical axis of
the graph for the full scale of the measurement
range.
Meas.
Element
TP
TN
-
Specifies TP/TN of the graph.
Note: L2 can be selected only for the two-point meter specification.
[DATA]
Refer to “ To display the [DATA] item screen” (page 128).
DATA 1/2
Main
