Measurement
27
Setup menu
The Setup menu allows you to select any parameters, working curves of the detector, display
settings, transmission output, relays and communication addresses.
Q
Entering the Setup menu
1.
In the Meas mode, hold down the HOLD key until the HOLD indicator lights up.
2.
Press the
▲
/
▼
key to display "SEt" in the measured value display part.
3.
Press the ENT key to establish the Setup menu.
4.
Press the
▲
/
▼
key to display a desired item on the auxiliary display.
5.
Press the ENT key to display the settings for any selected items.
After entering the Hold menu, a measured value changes while a transmission signal is held
in a specified method.
To return to the Meas mode, hold down the HOLD key or the ESC key.
Note
When the HOLD indicator is lit up, a displayed value changes, but transmission output takes on the
output value defined in the Setup menu.
Setup menu
Display of
Various
settings
Setting
Change
Establishes
the value
Cancels the
value
Hold mode
User Check
menu
Cal menu
Hold down the ESC
key to Meas mode.
or
Returns to hold down
the HOLD key.
Meas mode
