Installation
17
J
Connecting the detector cable
Q
Precautions for the detector cable
z
Turn OFF the power source during the connecting work.
z
For maintenance, the detector will need to be pulled up. For this reason, provide enough
wiring to allow for this.
z
Lay down the detector cable along a route that is adequately separated from the vicinity of
any equipment that may cause induction in the motors, etc. and power cables of said
equipment.
Q
Connections
The following terminals are available for the detector cable.
Based on the illustrated below, connect the detector cable correctly to each corresponding
terminal in the terminal block.
1:
Power source
+
12 V
Brown
2:
Power source 0 V
Red
3:
Communication
+
Orange
4:
Communication
−
Yellow
5:
Grounding
Green
Brown/Red/Orange/
1 2 3 4 5
Yellow/Green
