Overview
5
J
Description of operation keys
The operation keys are used to toggle between displayed information, to enter any setting
values, or to perform calibration work.
When the indication is blinking, the figures and parameters can be changed.
Use the
▲
/
▼
(UP/DOWN) key to select a blinking value or item, and then press the ENT key.
The setting will flash and then be established.
Note
Do not press any operation key with the tip of your fingernail or any pointed object.
Key
Representation in
text
(meaning)
Description/Operation
ESC key
(escape)
Used to go back to the previous menu from any other menu.
When various settings are made in the Hold mode, pressing this key once
will return you to the previous item.
The change that has been previously made to any setting is canceled.
Hold
down
Holding down this key in the Hold mode will enter the Meas mode.
HOLD key
(hold)
Hold
down
Holding down this key in the Meas mode will enter the Hold mode.
Holding down this key in the Hold mode will enter the Meas mode.
CAL key
(calibration)
Hold
down
Holding down this key until the CAL indicator lights up will select
the Calibration mode.
▲
key
▼
key
(select)
Used to change the displayed item or value.
Pressing this key changes the value in increments or decrements of 1.
Holding down the key continuously increases or decreases the value.
The
▲
and
▼
keys are used to scroll up and down, respectively. If the
screen is scrolled up or down excessively with either key, press the other
key.
ENT key
(input)
Used to establish each setting or calibrated value.
Note
No change is reflected if you return to the previous menu by pressing
the ESC key.
