Overview
6
J
Status display
Q
Status display
Display
Representation
in text
(meaning)
Description/Operation
HOLD
z
Illuminated in the Hold mode (when the transmission output is held).
z
Starts blinking when contact input is received or when the hold mode
becomes active due to an error.
CAL
Illuminated when the Cal mode becomes active.
EXT1
Lights up while the cleaning directive contact signal is input.
CLN
Lights up when the cleaning output contact is output.
FAIL
Lights up when the contact of a FAIL signal is output. The coil current of a FAIL
output relay is turned off when a Fail signal is output.
System
Priority levels of
errors
Turns ON when system error E-90, E-91, or E-92 occurs.
Sensor
Priority levels of
errors
Lights up when sensor errors E-41 or E-80 to E-84 occur.
Sensor
CHECK
Lights up during connection check of the detector.
