Honeywell SMV800, User Manual

Page: 37 / 220

Revision 1.0 SMV800 Modbus User's Guide Page 25
Engineering Units
The Flow Config tab displays the Lower Range Value (LRV), Lower Range Limit (LRL), Upper Range
Value (URV) and Upper Range Limit (URL) for Flow in the unit of measure selected in the
Engineering Units field “
Flow Unit
”
.
Flow Engineering Units
Select one of the preprogrammed engineering units for display of the flow measurements, depending
upon type of flow measurement configuration.
Table 2-3 lists the pre-programmed engineering units
for volumetric flow and Table 2-4 lists the engineering units for mass flow.
Table 2-3: Pre-programmed Volumetric Flow Engineering Units for Flow
Engineering Unit Meaning
M
3
/h
d
Cubic Meters per Hour
gal/h Gallons per Hour
l/h Liters per Hour
cc/h Cubic Centimeters per Hour
m
3
/min Cubic Meters per Minute
gal/min Gallons per Minute
l/min Liters per Minute
cc/min Cubic Centimeters per Minute
m
3
/day Cubic Meters per Day
gal/day Gallons per Day
Kgal/day Kilogallons per Day
bbl/day Barrels per Day
m
3
/sec Cubic Meters per Second
CFM Cubic Feet per Minute
CFH Cubic Feet per Hour
Table 2-4: Pre-programmed Mass Flow Engineering Units for Flow
Engineering Unit Meaning
Kg/sec Kilograms per Second
Kg/min Kilograms per minute
Kg/h Kilograms per Hour
lb/min Pounds per Minute
lb/h Pounds per Hour
lb/sec Pounds per Second
t/h
d
Tonnes per Hour (Metric Tons)
t/min Tonnes per Minute (Metric Tons)
t/sec Tonnes per Second (Metric Tons)
g/h Grams per Hour