Honeywell SMV800, User Manual

Page: 152 / 220

Page 140 SMV800 Modbus User's Guide Revision 1.0
Calibration
Date 125 DP, SP, PT Calibration Date
in DDMMYY format.
YY : Year with offset as 1900.
Eg. 0x020376 corresponds to
March 2, 2018.
When read, this will always
give Jan 01 2011 as date.
To read Calibration date
configured for DP, SP and PT
refer respective registers. RW uint8
Reserve 128 Reserve Address NA NA
Model Key 131 Model Key of transmitter
representing the
Differential and Static
Pressure measurement
ranges. RO ASCII
Model
Selection
Guide Part 1 135 Model Selection Guide
(MSG) Part 1 RO ASCII
Model
Selection
Guide Part 2 145 Model Selection Guide
(MSG) Part 2 RO ASCII
Model
Selection
Guide Part 3 155 Model Selection Guide
(MSG) Part 3 RO ASCII
Model
Selection
Guide Part 4 165 Model Selection Guide
(MSG) Part 4 RO ASCII
Comm Module
Temp Up
Count 175 The total number of minutes
that the Communications
Module/board Electronics
Temperature (ET) has
exceeded the upper stress
limit (ET Upper Limit) RO uint32
Comm Module
Temp Down
Count 177 The total number of minutes
that the Communications
Modlue/board Electronics
Temperature (ET) has been
below the lower stress limit
(ET Lower Limit) RO uint32
Reserve 179 Reserve Address NA NA
User Defined
Variables
Monitoring 188 User defined variables limit
check configuration for each
variable. RW uint8 Bit - 0 Enable Monitoring
of User Variable 1
Bit - 1 Enable Monitoring
of User Variable 2
Bit - 2 Enable Monitoring
of User Variable 3
Bit - 3 Enable Monitoring
of User Variable 4
Bit - 4 Enable Monitoring
of User Variable 5
Bit - 5 Enable Monitoring
of User Variable 6
Bit - 6 Enable Monitoring
of User Variable 7
Bit - 7 Enable Monitoring
of User Variable 8