Honeywell MicroDock II, Operating Manual

Page: 30 / 68

MicroDock II Automatic Test and Calibration Station 30
Gas Concentration Level
Depending upon the gas type selected, ppm, LEL%, or % displays beside the gas
concentration level.
NOTe
The following gas concentrations are factory configured and cannot be
changed:
Four-gas-mix ( • 4-Gas 2.5% vCH4 )
Four-gas equivalent ( • 4-Gas Equiv .)
Three-gas SO •
2
mix ( 3-Gas SO2 Mi )
The Custom 4-Gas , Custom 3-Gas , and Custom 2-Gas can be modified;
however, only the gas concentration levels can be changed.
Press 10. to move the icon down to the gas concentration level.
or
Press 11. sel. If the gas concentration level can be modified, the changes to
the * icon and the cursor displays below the first value selected to modify.
For custom and multi-gas: All of the applicable gases display (for 4-Gas
press
to scroll to the remaining gas type not currently displayed).
Press sel to select the required gas. The icon changes to * and the
cursor automatically displays below the first value selected to modify.
Press 12. or ^ to scroll to the required value. Press sel to save the
new value.
Or
Press sel to retain the current value. The cursor automatically moves
to the next value.
Repeat step #12 for the remaining values, then press 13. exit. The * then
changes back to the icon.