Honeywell MicroDock II, Operating Manual

Page: 29 / 68

MicroDock II Automatic Test and Calibration Station 29
Gas Type Gas Concentration
Custom 4-Gas ppm and %LEL *
Custom 3-gas ppm and %LEL *
Custom 2-Gas ppm and %LEL *
3 – Gas SO
2
Mi (3-gas mix) ppm and %LEL
Isobutylene ppm *
LEL %LEL *
CO
2
ppm *
CO
2
zero / N
2
(nitrogen) ppm *
Table 16. Inlets 2-5 – Available Gas Types
NOTe
The icon is used to scroll to different options and functions. The * icon
displays when a field is selected and can be modified.
To select a gas type, complete the following:
From the required inlet screen, the icon displays.
If the required gas type is displayed, press 5. to move down to the gas
concentration level. Proceed to the Gas Concentration Level section.
To select a different gas type, press 6. sel. The changes to * to indicate
that the field is activated. Press or ^ to scroll through the list of gas
types.
When the required gas type displays, press 7. sel. The * changes to to
confirm the new selection and to deactivate the field.
To enter the gas concentration level for the selected gas, proceed to the 8.
following section Gas Concentration Leve l.
Or
Press exit to return to the user options screen.
Press 9. exit again to return to the normal operating screen.