Honeywell MicroDock II, Operating Manual

Page: 25 / 68

MicroDock II Automatic Test and Calibration Station 25
The LCD displays information about the docking modules, the model of the detector,
and the detector serial number.
If a detector is inserted but not activated, the LCD displays the following
message.
Press OK to acknowledge the error message.
Batteries: The batteries are tested during activation and continuously thereafter. If
battery power is extremely low, the low battery icon flashes.
Multi-media card (MMC): The MMC card icon ( ) displays continuously on the
normal operating screen when the MMC card is inserted. The MMC card records
a variety of data.
Passcode Protection: If the station is Passcode protected, the Passcode protect
icon displays on the normal operating screen.
Deactivating the Station
The station must be in the normal operating mode to deactivate. From the normal
operating screen, press and hold
(the rightmost button) until Powering Down
displays.
The power down screen displays briefly before the station deactivates.
User Options Menu
The user options menu provides access to ten options. The following user options
are listed in the order they are displayed on the station LCD.
NOTe
Bump or calibration tests cannot be performed while the user options
menu is accessed. However, if a test is initiated before or while accessing
the user options menu, the test automatically begins when the user options
menu is exited.
To access the user options menu, complete the following:
Press and hold 1. menu to access the first screen.
If the station is Passcode protected, refer to Entering User Options when
Passcode Protected .
Press 2. or ^ to scroll to different options. When the icon displays
beside the required option, press sel to select.
To exit the options menu and return to the normal operating screen, press 3.
exit.