Honeywell HDZ30A, User Manual

Page: 48 / 114

www.honeywell.com/security
48 | HDZ Series Analogue PTZ User Manual
Basic Keyboard Controls
HDZ Series analogue PTZ dome is compatible with the UltraKey Touch (HJC4000). The control
keyboards have some predefined commands to perform functions with the camera. See the
following sections for more information on these commands.
The setup options in the OSD menu are described in Chapter 4, Operation and Configuration .
Sending the Dome to a Preset
A preset is a memorized PTZ position, showing a specific field of view, that can be recalled
manually by the operator, or automatically moved to when triggered by an event, such as
motion.
To go to a preset using the UltraKey controller (HJC4000), press View , then the preset number ,
and then Enter .
For example: Press View

1

4

Ent to tell the camera to go to Preset 14 .
Special Presets
Special presets 72 to 99 are reserved for controlling and programming the dome. Do not
program preset positions for presets 72 to 99. See for a list of the special presets and their
functions.
Table 3-3 Special Presets
Preset Function Protocol
72 Recover encrypted user login
Diamond, MAXPRO-mode, VCL, Pelco P,
Pelco D
73
Enable broadcast command receive mode
(displays:
Broadcast RX Mode ON
)
74
Disable broadcast command receive mode
(displays:
Broadcast RX Mode OFF
)
75
Opens Setup Menu 1 with the password field
selected
76 Run mimic tour 1–16
MAXPRO-mode, VCL, Pelco P, Pelco D 77 Program mimic tour
78 Run preset tour 1–16
79 User default setting preset
Diamond, MAXPRO-mode, VCL, Pelco P,
Pelco D