Honeywell HDZ30A, User Manual

Page: 64 / 114

www.honeywell.com/security
64 | HDZ Series Analogue PTZ User Manual
Figure 4-14 Main Menu Page 2
Setting the ID Display
If required, you can set the HDZ Series PTZ camera to display the ID number of the dome on
the screen to aid in identifying domes when monitoring video.
1. Press the direction key down to go from MAIN MENU page 1 to MAIN MENU page 2.
2. The ID DISPLAY menu item will be shown at the top of the screen.
3. Set ID DISPLAY to ON to enable the dome ID to display in the bottom right corner of the
screen (see #8 in Figure 3-3 ). Set ID DISPLAY to OFF to disable the dome ID.
Setting Up the Zone Title Display
HDZ Series users have the option to name a viewing area (zone) viewed with the PTZ camera,
so that the title will be displayed on-screen for easy recognition. Up to 16 zone titles can be set
for different PTZ positions (zones).
The title display option must be enabled (see Enabling the Title Display, page 64 ), and at least
one title to be displayed must be input (see Entering a Zone Title Name, page 64 ).
Enabling the Title Display
1. Press the joystick or direction key down to go from MAIN MENU page 1 to MAIN MENU
page 2.
2. Set TITLE DISPLAY to ON to enable displaying the title on-screen when viewing video
from the camera.
Set TITLE DISPLAY to OFF to disable the on-screen title display.
Entering a Zone Title Name
Up to 16 zone titles can be set. Each zone title has a maximum of 20 characters.
Follow the steps in this procedure to set a camera zone title:
1. Use the pan, tilt and zoom controls to operate the camera and move it to view the area
(zone) that you want to set the title for.
2. Turn on the OSD, and press the joystick or direction key down to go to MAIN PAGE 2.
MAIN PAGE2 2/3
ID DISPLAY OFF →
TITLE DISPLAY OFF →
ZONE TITLE 01 ↓→
PRESET ENTER ↓
PRESET TOUR ENTER ↓
AUTOPAN ENTER ↓
MIMIC TOUR ENTER ↓
HOME SETTING ENTER ↓