Honeywell HDZ30A, User Manual

Page: 53 / 114

Operation and Configuration | 53
800-16526 - A - 07/2014
Normal Mode
In this mode, the camera will keep in focus automatically and continuously in any condition.
Zoom Trigger Mode
In this mode, auto focusing is activated at the time when the zoom value is changed. The camera
will still auto focus once at the beginning of pan/tilt movement (no auto focusing during pan/tilt
movement or when pan/tilt movement stops).
PTZ Trigger Mode
In this mode, auto focusing is triggered when the camera is controlled to pan, tilt or zoom.
EXIT+SAVE
Press IRIS+ on this item to save the selected AF Mode.
Manual Focus
In this mode, users can adjust focus near/far by using the control keyboard’s Focus Near/Far
keys.
After completing focus setup, go back to the Main Page 1 (see Figure 4-1 ) and continue to set
other relevant camera options.
Note The AF mode will be resumed after every boot.
Setting the Auto Exposure Mode Options
The exposure is the amount of light received by the image sensor and is determined by the
width of the lens diaphragm opening (iris adjustment), the amount of exposure by the sensor
(shutter speed) and other exposure parameters. With this item, users can define how the Auto
Exposure (AE) function works for the camera.
Setting the Exposure Compensation
If set to ON , the exposure value rages from -10.5dB to 10.5dB . Select OFF to disable the
function.
Setting the Auto Exposure Mode
Select the auto exposure mode for the camera and press IRIS+ to adjust the settings for the
selected mode (see
Figure 4-3 ).