www.honeywell.com/security
68 | HDZ Series Analogue PTZ User Manual
Setting the Preset Position
Users can assign a specific preset position to the selected Preset Number with this item (see
). Use the joystick or LEFT/RIGHT direction keys to select a preset from
1
~
255
or
END
.
END
is the selection used for the Preset Position following the last Preset Position you
want programmed when the amount of preset numbers will be less than 32 (see
Note
If you are not using all 32 Preset Numbers in the tour, please set the point
following the last required Preset Number as
END
(for
PRESET POSITION
) so
that the preset tour can function properly. For example, if a user intends to set a
Preset Tour with 5 Preset Positions, it is required to set the
PRESET POSITION
of Preset Number
06
as
END
.
Setting the Preset Tour Speed
Users can set the pan/tilt speed of the HDZ Series Analogue PTZ Dome Camera from the
selected Preset Position to the next point in the tour. Users can set speeds that range from
1
(slowest) to
15
(fastest). Within this range, the PAN speed varies from 10 to 400 (degrees/sec.),
and the TILT speed varies from 8 to 400 (degrees/sec.).
Setting the Preset Tour Dwell Time
The
DWELL TIME
is the duration of time that the Analogue PTZ Dome will stay at the Preset
Position. The available dwell time range is from
000
to
127
seconds. The HDZ Series Camera
will go to the next Preset Position after the dwell time expires. If the dwell time is set to
000
, the
HDZ Series Camera will stay at the current position for less than 1 second and then move to the
next position.
Running a Preset Tour
Users can command the HDZ Series Analogue PTZ Dome to run the selected Preset Tour
manually. Select the
PRESET TOUR NO
to run, move the cursor to
RUN PRE TOUR
and press
the
IRIS+
key (
ENTER
) to execute the selected Preset Tour (see
for more information).
Note
Users can also execute the Preset Tour function through a keyboard/controller.
Please refer to the keyboard’s documentation for more information about
executing PTZ commands.
Summary of Contents for HDZ30A
