Honeywell HDZ30A, User Manual

Page: 108 / 114

www.honeywell.com/security
108 | HDZ Series Analogue PTZ User Manual
2. Tighten the pre-installed Torx screw on the camera housing to secure the camera to the
bracket frame.
Step 4: Install the camera and bracket assembly
1. Pull the loose end of the safety cable through the
opening in the ceiling and attach it to one of the
eyelets on the bracket frame.
2. Pull the camera cable(s) through the opening in the
ceiling and connect the cable(s) to the camera.
3. Insert the camera and bracket assembly into the
opening in the ceiling and attach the camera and
bracket assembly to the ceiling support ring using
the two supplied thumb screws. Use a Phillips
driver to tighten the screws.
Step 5: Attach the trim ring
Attach the trim ring to the ceiling support ring
by lining up the two magnets on the trim ring
with the two thumb screws on the ceiling
support ring.
Note No screws are needed to attach the trim ring.