Honeywell HDZ30A, User Manual

Page: 65 / 114

Operation and Configuration | 65
800-16526 - A - 07/2014
3. Select the ZONE TITLE option.
4. Select a number to represent the current viewing area (zone).
5. Press the IRIS+ key ( ENTER ) on the keyboard to open the title editing page (see
Figure 4-15 )
Figure 4-15 Camera Title Editing
6. Choose a character with the joystick or direction keys and then press the IRIS+ key
( ENTER ) to input the character. For example:
Select
D

IRIS+

O

IRIS+

O

IRIS+

R

IRIS+ to enter the title
DOOR
.
7. To delete a character, move the cursor to the LEFT or RIGHT command and press IRIS+
until you have selected a character in the entry field to be deleted. Select DELETE and
press IRIS+ to delete the selected character.
8. When the title is complete, move the cursor to SAVE and press IRIS+ .
The new title will now display when viewing the zone it was set for (see #7 in Figure 3-3 ).
Setting Up a Preset Position
Programming a Preset
A total of 256 preset positions can be set for your HDZ Series Analogue PTZ Dome. Follow the
steps below to program a preset position:
1. Select PRESET in MAIN PAGE 2 and press IRIS+ . The PRESET menu will open (see
Figure 4-16 ).
Figure 4-16 Preset Menu
2. Use the joystick or press the right/left keys on the keyboard to select a preset number
(
001
represents preset point 1,
002
represents preset point 2, and so on).
ZONE TITLE: 01
0 1 2 3 4 5 6 7 8 9 EXIT
A B C D E F G H I J SAVE
K L M N O P Q R S T LEFT
U V W X Y Z : / . , RIGHT
( ) + ? - DELETE
TITLE:
DOOR
PRESET
PRESET POINT 001 →
PRESET SET PT MOVE ↓
PRESET RUN ENTER ↓
SET TITLE ENTER ↓
CLEAR TITLE ENTER ↓
EXIT YES