Honeywell HDZ30A, User Manual

Page: 59 / 114

Operation and Configuration | 59
800-16526 - A - 07/2014
Setup Menu Page 2 Settings
In Setup Menu 2 (see Figure 4-8 ), users can set the Flip, Angle Adjuster and PT Position settings,
and choose whether to activate optional functions, including Speed by Zoom, Auto Calibration,
Password, OSD Auto Closing and System Reset. Refer to the following sections for more
information on each function.
Figure 4-8 Setup Menu Page 2
Enabling the Image Flip Option
Users can continuously track an object when it passes under the HDZ Series Analogue PTZ
Dome by changing the
FLIP setting to IMAGE (digital flip) or M.E. (mechanical flip).
Figure 4-9 Flip Setting Options
IMAGE (Digital Flip)
IMAGE represents a digital image flip, which enables users to keep tracking objects seamlessly.
Under this mode, almost no delay occurs when the camera flips, as compared with the M.E.
mode image flip.
Note The Privacy Mask function will be automatically disabled if the Image Flip function
is enabled. The message,
MASK WILL BE SET OFF
, will be shown on the
screen.
SETUP MENU 2
FLIP ENTER ↓
ANGLE ADJUSTER ENTER ↓
PT POSITION ENTER ↓
SPEED BY ZOOM ON →
AUTO CALI. OFF →
PASSWORD OFF →
OSD AUTO CLOSE 20 SEC →
SYSTEM RESET ENTER ↓
PAN SPEED 200 →
EXIT YES
FLIP SETTING
FLIP IMAGE →
EXIT+SET YES