Honeywell DL230, Operating Instructions Manual

Page: 70 / 104

70 Operation
Display Description
Vo1,2 V3,4
Displayed: Original meter readings of inputs 1 and 2,
main counters of inputs 3 to 4,
current date and time of device,
Format: 9 digits before and 4 digits after decimal point
with short descriptions and units
large V1 V2 Displayed: Main counters of inputs 1 and 2
Format: 8 digits before and 3 digits after decimal point
with input, short descriptions and units
large Vo1
V2
Displayed: Original meter reading of input 1, Main coun-
ter of input 2
Format: 8 digits before and 3 digits after decimal point
with input, short descriptions and units
large Vo1,2
Displayed: Original meter readings of inputs 1 and 2
Format: 8 digits before and 3 digits after decimal point
with input, short descriptions and units
6.5 Use as high-flow display device
The DL230 has an integrated high-load display function and has national
approval.
The following consumption figures are calculated and stored for each of the
four inputs along with timestamps and can be shown on the device when
requested:
-
the load registered during the current measurement period (VxMPc

)
-
the load registered during the previous measurement period (VxMPL

)
-
the highest load registered within a measurement period within the current
month (VxMPc

)
-
the load registered during the current day (VxDGc

)
-
the load registered during the previous day (VxDGL

)
-
the highest daily load registered during the current month (VxDGc

)
The measurement period maximum (VxMPL

) and the daily maximum
(VxDGL

) of the last 15 months are stored in the monthly archive of the
respective input. The content of this archive can be found under:
Admin

Input x

Monthly Archive Ix