Honeywell DL230, Operating Instructions Manual

Page: 88 / 104

88 Faults
8.1.1
Personnel
– The works described below for the elimination of a fault can, unless
specified otherwise, be performed by the operator.
– Some works may only be carried out by specially trained professionals
or exclusively by manufacturers themselves; special reference will be
made to this in the descriptions of individual faults.
– Works on the electrical appliance may only be carried out by qualified
electricians.
8.1.2
Personal protective equipment
– When eliminating faults on the device, the necessary personal protec-
tive equipment for the work must be worn inside the respective plant.
– The notices relating to personal protective equipment mounted in the
working area must be followed at all times.
8.1.3
Improper elimination of faults
WARNING!
Risk of injury through improper elimination of faults!
An improper elimination of faults on the device may lead to
serious personal injury or material damage.
Therefore:
– Ensure that there is sufficient assembly space before
commencing works.
– Ensure that the installation location is clean and tidy.
Components that are loosely stacked or lying around can
cause accidents.
– If parts have been removed, ensure that they have been
installed correctly, re-mount all fastenings, and adhere to
tightening torque values for screws.
The following information on possible faults provide
indications as to who is authorized to eliminate the fault.