Maintenance
83
DANGER!
The concurrent operation of an old battery and a new
one may present a risk of explosion!
When using two modem batteries, both batteries must always
be replaced!
9.
Place the new battery onto the base of a location provided for it (Ill.: 25
3 ).
Fix the new battery into place with the mounting element. The mounting
element can then be fixedly pushed into the left- and right-hand guides.
Remove the old battery from the housing and dispose of it correctly.
Close the housing using the four screws provided (Ill.: 23 2 ).
13. Monitoring of the battery change can take place by checking the voltage
of the modem battery as described in chapter 7.3.2.
Please ensure that the new batteries are connected
correctly and are in a fixed position inside the DL230.
CAUTION!
Damage to property caused by improper device
closure!
If the device is not properly closed cables can get pinched
and cause damage.
Therefore, ensure correct positioning of the cable guide
when closing.
Summary of Contents for DL230
