Honeywell DL230, Operating Instructions Manual

Page: 52 / 104

52 Operation
6
Operation
The "enSuite" software and data interfaces of the DL230 can
be used to perform further applications other than those
described below. Instructions can be found under
www.elster-instromet.com.
6.1 Safety
6.1.1
Personal protective equipment
When working on the device inside a gas-handling plant, personal protec-
tive equipment must be worn to minimize risks to health.
– During works on the device, the necessary personal protective equip-
ment must be worn inside the respective plant at all times
– The notices relating to personal protective equipment mounted in the
working area must be followed at all times.
6.2 Operating personnel
The following groups of people are authorized to perform different functions
when operating the DL230.
6.2.1
Instructed personnel
A person instructed on how to operate the DL230, who,
– will be informed of the tasks assigned to them and possible risks result-
ing from inappropriate behaviour, in a training session provided by the
operator.
– is authorized to read and take note of values and parameters using the
control elements of the DL230.
6.2.2
Qualified personnel
A person qualified to operate the DL230, who,
– on the basis of their specialist training, knowledge and experience, as
well as their awareness of the relevant statutory provisions, are in a
position to perform their assigned tasks on the device and are able to
independently identify and prevent possible risks.