�HONDA
� MBX50,MBX80
CYLINDER COMPRESSION
Warm up the engine.
Stop the engine and remove the spark plug.
Insert a compression gauge.
Open the choke and throttle grip fully and operate
the starter pedal several times.
COMPRESSION: 130 kPa (13.0 kg/cm
2
185 psi)
low compression can be caused by:
• Blown cylinder head gasket
• Worn piston rings
• Worn cylinder
High compression can be caused by:
e Carbon deposits in combustion chamber or on
piston head
CLUTCH
Inspect the clutch lever free play at the end of the
lever.
FREE PLAY: 10-20 mm (3/8-3/4 in)
Adjust free play by loosening the lock nut and turn
ing the adjusting nut until the free play is 10-
20 mm (3/8-3/4 in).
l
10-20 mm
(3/8-3/4 in)
T
INSPECTION AND ADJUSTMENT
(1) COMPRESSION GAUGE
(1) ADJUSTING NUT
(2) LOCI< NUT
(3) CLUTCH CABLE
3 .. 7
Summary of Contents for MBX50
