r;;;;;Jj\
HONDA
� MBX50· MBXSO
Oil STRAINER CLEANING
Disconnect the oil tube at the oil pump and allow
the oil to drain into a clean container.
Remove the right side cover.
Loosen the tube clip and disconnect the oil tube
joint under the oil tank.
Remove the oil strainer screen.
Clean the oil strainer screen with compressed air.
Installation of the oil strainer is the reverse order of
removal.
Fill the oil tank with the recommended oil up to the
proper level.
Bleed air from the oil pump and oil pipe (Page 2-7)
CAUTION
a
Connect the oil pipe securely.
e
Check for leaks.
(1) OIL PUMP
(2) OIL TUBE
(1) OIL STRAINER-ml
SCREEN
�
(2) 01 L TUBE ---111>-....
t!//fe
CLIP
(3) OIL STRAINER--�
JOINT
�
(4) OIL TUBE
JOINT
(1) OIL STRAINER SCREEN
LUBRICATION
AIR NOZZLE
2-4
Summary of Contents for MBX50
