Honda EU3000i Handi, Manual

Page: 169 / 194

CYLINDER BLOCK
15-4
CRANKSHAFT/PISTON REMOVAL/
INSTALLATION
Remove the following parts:
– Cylinder head (page 14-3)
– Crankcase cover (page 15-3)
REMOVAL:
When removing the
valve lifters, mark so that
the intake and exhaust
sides can be
distinguished.
INSTALLATION:
Attach the valve lifters to
the cylinder barrel
assembly immediately
before installing the
camshaft.
PISTON ASSEMBLY
PISTON
VALVE LIFTER (2)
CONNECTING ROD BOLT (2)
INSTALLATION:
Install the piston assembly in the cylinder barrel assembly with
the mark on the piston head toward the push rod hole of the
cylinder head.
CYLINDER BARREL
(Slipper surface
and stem)
(Cam and bearings)
CAMSHAFT
INSTALLATION:
Set the connecting rod cap with the oil
dipper toward the camshaft and align
the ribs of the connecting rod cap and
the connecting rod.
CONNECTING ROD CAP
(Threads and
seating surface)
12 N.m (1.2 kg f· m, 9 lb f· ft)
INSTALLATION:
Before installing the
crankshaft, check the
oil seal of the
cylinder barrel for
damage or
hardening.
Be careful not to
damage the oil seal
when installing the
crankshaft.
CRANKSHAFT
(Oil seal lip)
MARK
PUSH ROD HOLE
INSTALLATION:
Install the camshaft to
the cylinder barrel by
aligning the punch
marks of the
camshaft and the
crankshaft as shown.
CRANKSHAFT
PUNCH MARKS
CAMSHAFT