Honda EU3000i Handi, Manual

Page: 95 / 194

FUEL SYSTEM
6-22
FLOAT VALVE
Check for a worn float valve (1) and valve seat (2)
contamination.
PILOT SCREW REPLACEMENT
The limiter cap is an emission-related part.
Leave the pilot screw (1) and limiter cap (2) in place
during carburetor cleaning. Remove only if necessary
for repair of the carburetor.
Removal of the limiter cap requires breaking the pilot
screw.
A new pilot screw and limiter cap must be installed.
When the limiter cap has been broken off, remove the
broken pilot screw.
Place the spring on the replacement pilot screw, and
install it on the carburetor.
Turn the pilot screw (1) in until it is lightly seated, then
turn the screw out the required number of turns.
(1)
(2)
OK REPLACE CLEAN
(1)
(2)
Pilot screw breaks at narrow point.
Pilot screw opening: 1 - 1/4 turns out
(1)