Honda EU3000i Handi, Manual

Page: 53 / 194

TROUBLESHOOTING
4-6
ENGINE OIL LEVEL IS LOW, BUT ENGINE DOES NOT STOP
1
2 1
GENERATOR WIRE HARNESS
CONTROL WIRE HARNESS
Viewed from terminal side
Viewed from terminal side
Y
Y
C4
Light comes on
Check the ignition control module line and ignition
control module (page 9-7 and 8). Replace the
spark unit, if no abnormalities are is found.
No continuity
Replace or repair the generator wire harness
(page 8-10).
Abnormal
Replace or repair the control wire harness (page
8-13).
Drain the engine oil.
Remove the spark plug cap.
Pull the recoil starter grip and check the oil alert
indicator light on.
Light does not come on
Remove (disconnect) the inverter unit (page 8-7).
Disconnect the generator 10P connector from the
control wire harness. Check terminal No.10 (Y) of
the 10P connector and the C4 of the connector for
open or short and for proper connection.
Continuity
Check the harness connecting the control wire
harness 10P connector, terminal No. 10 and
ignition control module connector, terminal No. 2
for open or short circuit and for proper
connection.
Normal
Abnormal
Check the oil level switch (page 11-3).
Normal
Check the ignition control module line and ignition
control module (page 9-7 and 8). Replace the
ignition control module if abnormalities are is
found.
Replace the oil level switch (page 11-2).