Honda automobile Owner'S Manual Download Page 247

Page: 247 / 353

The coolant level should be up to
the base of the filler neck. Add
coolant if it is low.

Make sure the engine and radiator
are cool.

Relieve any pressure in the cooling
system by turning the radiator cap
anticlockwise, without pressing
down.

Remove the radiator cap by
pushing down and turning
anticlockwise.

Pour the coolant slowly and
carefully so you do not spill any.
Clean up any spills immediately; it
could damage components in the
engine compartment.

Put the radiator cap back on, and
tighten it fully.

Engine Coolant (Petrol models)

Maintenance

244

Removing the radiator cap
while the engine is hot can
cause the coolant to spray
out, seriously scalding you.

Always let the engine and
radiator cool down before
removing the radiator cap.

RADIATOR CAP

06/10/30 17:15:13 32SJD620_247

Summary of Contents for automobile


































































































































































































































































































































































Search results

Summary of Contents for automobile

Reviews:

Related manuals for automobile

Brands by name

Popular brands

Honda automobile, Owner'S Manual

Search results

Summary of Contents for automobile

Reviews:

Related manuals for automobile

Brands by name

Popular brands