Honda automobile Owner'S Manual Download Page 305

Page: 305 / 353

Store the jack in its holder. Turn
the jack’s end bracket clockwise to
lock it in place. Store the tool kit.
Replace the cover.

Store the wheel cover or centre
cap in the luggage area. Make
sure it will not get scratched or
damaged.

Close the tailgate.

Adjust the rear centre seat
forward as far as it will possibly go.

Place the flat tyre face down in the
spare tyre well.

Remove the spacer cone from the
wing bolt, turn it over, and put it
back on the bolt.

Secure the flat tyre by screwing
the wing bolt back into its hole.

On some types, remove the centre
cap before storing the flat tyre in
the spare tyre well.

22.

23.

18.

19.

20.

21.

17.

Changing a Flat Tyre

Taking Care of the Unexpected

302

Loose items can fly around
the interior in a crash and
could seriously injure the
occupants.

Store the wheel, jack, and
tools securely before driving.

For spare tyre

For normal tyre

WING BOLT

SPACER CONE

CENTRE CAP

06/10/30 17:23:06 32SJD620_305

Summary of Contents for automobile


































































































































































































































































































































































Search results

Summary of Contents for automobile

Reviews:

Related manuals for automobile

Brands by name

Popular brands

Honda automobile, Owner'S Manual

Search results

Summary of Contents for automobile

Reviews:

Related manuals for automobile

Brands by name

Popular brands