Honda automobile Owner'S Manual Download Page 139

Page: 139 / 353

Your vehicle has the front and rear
ceiling lights as standard equipment.

Each ceiling light has a three-
position switch; ON, door activated
(centre), and OFF.

In the ON position, the ceiling light
stays on continuously. In the OFF
position, the light does not come on.

In the door activated position, both
front and rear ceiling lights come on
when you:

Open any door and tailgate.

Remove the key from the ignition
switch. If you do not open a door,
the light fades out in about 30
seconds.

Unlock the doors with the key or
remote transmitter.

The light fades out and it goes off 30
seconds after you close all the doors
or tailgate.

The light goes off soon after you
lock the driver’s door or you turn the
ignition switch to the ON (II)
position.

If you leave any door open when the
key is not in the ignition switch, the
ceiling light will go off after 3
minutes.

Instruments and Controls

Ceiling Lights

Interior Lights

136

DOOR ACTIVATED

OFF

06/10/30 17:00:13 32SJD620_139

Summary of Contents for automobile


































































































































































































































































































































































Search results

Summary of Contents for automobile

Reviews:

Related manuals for automobile

Brands by name

Popular brands

Honda automobile, Owner'S Manual

Search results

Summary of Contents for automobile

Reviews:

Related manuals for automobile

Brands by name

Popular brands