Honda automobile Owner'S Manual Download Page 134

Page: 134 / 353

Open the glove box by pulling the
handle. Close it with a firm push.

To use the cushion tray, pull the
strap, and pivot the seat cushion
forward.

The glove box light comes on when
the light control switch is in the

position.

You can lock or unlock the glove box
with the ignition key.

Interior Convenience Items

Instruments and Controls

Glove Box

Cushion Tray

131

An open glove box can cause
serious injury to your
passenger in a crash, even if
the passenger is wearing the
seat belt.

Always keep the glove box
closed while driving.

GLOVE BOX

STRAP

LOCK

06/10/30 16:59:30 32SJD620_134

Summary of Contents for automobile


































































































































































































































































































































































Search results

Summary of Contents for automobile

Reviews:

Related manuals for automobile

Brands by name

Popular brands

Honda automobile, Owner'S Manual

Search results

Summary of Contents for automobile

Reviews:

Related manuals for automobile

Brands by name

Popular brands