Honda automobile Owner'S Manual Download Page 267

Page: 267 / 353

Determine which of the four bulbs
is burned out: stop/tail-light, back-
up light, turn signal light or rear
fog light.

Remove the socket by turning it
one-quarter turn anticlockwise.

Place a cloth on the edge of the
cover. Remove the covers by
carefully prying on the edge with a
small flat-tipped screwdriver.

Use a Phillips-head screwdriver to
remove the two screws, then
remove the high-mount brake
light assembly.

Pull the bulb straight out of its
socket.

Install the new bulb in the socket.

Test the lights to make sure the
new bulb is working.
Reinstall the socket by turning it
clockwise until it locks.

Reinstall the cover.
Connect the band connector.

Lights

Maintenance

Replacing a High-mount Brake
Light Bulb

264

SCREW

COVERS

HIGH-MOUNT BRAKE
LIGHT ASSEMBLY

06/10/30 17:18:11 32SJD620_267

Summary of Contents for automobile


































































































































































































































































































































































Search results

Summary of Contents for automobile

Reviews:

Related manuals for automobile

Brands by name

Popular brands

Honda automobile, Owner'S Manual

Search results

Summary of Contents for automobile

Reviews:

Related manuals for automobile

Brands by name

Popular brands