Honda automobile Owner'S Manual Download Page 270

Page: 270 / 353

Insert the new bulb into the hole,
and turn it one-quarter turn
clockwise to lock it in place.

Push the electrical connector back
onto the bulb. Make sure it is on
all the way.

Turn on the front fog lights to test
the new bulb.

Reinstall the front fog light
assembly back in place, then
tighten the screws.

Remove the electrical connector
from the bulb by squeezing the
connector to unlock the tab, then
slide the connector off the bulb.

Remove the bulb by turning it
approximately one-quarter turn
anticlockwise.

Remove the front fog light
assembly by removing the screws.

Reinstall the front fog light cover,
then tighten the screws and
reinstall the covers.

10.

11.

Lights

Maintenance

267

SCREWS

FRONT FOG LIGHT
ASSEMBLY

BULB

CONNECTOR

06/10/30 17:18:41 32SJD620_270

Summary of Contents for automobile


































































































































































































































































































































































Search results

Summary of Contents for automobile

Reviews:

Related manuals for automobile

Brands by name

Popular brands

Honda automobile, Owner'S Manual

Search results

Summary of Contents for automobile

Reviews:

Related manuals for automobile

Brands by name

Popular brands