Honda automobile Owner'S Manual Download Page 147

Page: 147 / 353

Airflow is divided between

the floor vents and demister vents at
the base of the windscreen.

Air flows from the demister

vents at the base of the windscreen.

Airflow is divided between

the vents in the dashboard and the
floor vents.

Air flows from the floor

vents.

Use the mode control dial to select
the vents the air flows from. Some
air will flow from the dashboard
corner vents in all modes.

Air flows from the centre

and corner vents in the dashboard.

When you select

, the system

automatically switches to fresh air
mode and turns on the A/C. (The
A/C indicator will not come on in the
display).

The flow-through ventilation system
draws in outside air, circulates it
through the interior, then discharges
it through vents near the tailgate.

Set the temperature to maximum.
Make sure the A/C is off.
Select

and Fresh Air mode.

Set the fan to the desired speed.

1.
2.
3.
4.

Mode Control Button

Ventilation

Climate Control System

Features

144

06/10/30 17:01:11 32SJD620_147

Summary of Contents for automobile


































































































































































































































































































































































Search results

Summary of Contents for automobile

Reviews:

Related manuals for automobile

Brands by name

Popular brands

Honda automobile, Owner'S Manual

Search results

Summary of Contents for automobile

Reviews:

Related manuals for automobile

Brands by name

Popular brands