Honda automobile, Owner'S Manual

Page: 169 / 353

To load multiple CDs in one
operation:
Press and hold the LOAD button
until you hear a beep, then you see
‘‘LOAD’’ in the display.
Insert the disc into the CD slot.
Insert it only about halfway; the
drive will pull it in the rest of the
way. You will see ‘‘BUSY’’ in the
display. The CD load indicator
turns red and blinks as the CD is
loaded.
When ‘‘LOAD’’ appears again in
the display, insert the next disc
into the CD slot.
Repeat this until all six positions
are loaded. The system will then
begin playing the last CD loaded.
Load and play only standard round
discs. Odd-shaped CDs may jam in
the drive or cause other problems.
You cannot load and play 8-cm
(3-inch) discs in this system.
To load CDs or operate the CD
changer, the ignition switch must be
in the ACCESSORY (I) or ON (II)
position.
Your Honda’s audio system has an
in-dash CD changer that holds up to
six discs, providing several hours of
continuous entertainment. You
operate this CD changer with the
same controls used for the radio.
Do not use discs with adhesive labels.
The label can curl up and cause the
disc to jam in the unit.
If you stop loading CDs before all six
positions are filled, the system will
wait for 10 seconds, then stop the
load operation and begin playing the
last CD loaded. 1.
2.
3.
4.
Except A type
Operating the In-Dash CD
Changer
Loading CDs in the Changer
Audio System
Features
166
06/10/30 17:04:01 32SJD620_169